Two-Piece Strap Customizations
Strap Length
Strap length comprises of two measurements:
- Holes side (typically longer side positioned at 6'o'clock)
- Buckle side
No restrictions on strap length.
Please exclude buckle in measurements.
View our strap length sizing guide here.
Strap Width
The strap width corresponds to your watch's lug width.
Available in increments of 0.1mm (e.g., 20.5mm strap width).
No restrictions on strap width, but we only carry buckles in 14mm, 16mm, 18mm, and 20mm. You can use your own buckle.
Taper & Buckle Width
Taper width is corresponds to the buckle width. It cannot be wider than the strap width. Typically, it is even-sized between 14mm and 22mm.
No restrictions on taper/buckle width.
Odd-sized taper/buckle widths (e.g., 15mm) possible.
We carry buckles in 14mm, 16mm, 18mm, and 20mm widths. You can use your own buckle.
Curved End
Watches with extra short lugs (e.g. modern Rolex watches) may require curved end straps. A curved-end strap prevents the strap from rubbing against the watch case.
We do not offer curved ends for unlined and canvas straps.
Curved quick-release springbars are available here.
Buckle Finish
We offer four finishes in the following sizes:
- Brushed stainless steel: 14mm, 16mm, 18mm, 20mm
- Polished stainless steel: 14mm, 16mm, 18mm, 20mm
- Polished yellow gold plated: 14mm, 16mm, 18mm
- Matte black PVD: 16mm, 18mm
If you plan on using your buckle, please refer to next section ("Using My Own Buckle").
We do not offer deployant clasps or generic/unbranded tang buckles.
Using My Own Buckle
If you plan on using your own tang buckle:
- Width of buckle tongue cutout/notch
- Width of buckle pinholes
If you plan on using your own deployant clasp/buckle:
- Width of buckle tongue cutout/notch
- Width of buckle pinholes
- Indicate if keepers/loops required
Quick-Release Springbars
Sizes offered: 17mm, 18mm, 19mm, 20mm, 21mm, 22mm
Also available as curved. Not available in half-sizes (e.g. 20.5mm).
Buckle Pinholes
- Position of first hole (closest to the watch end)
- Position of last hole (furthest from watch end)
- Number of buckle pinholes
Position is calculated as distance from the buckle pinhole to the strap's watch end.
Thickness & Padding
Even thickness throughout the strap (flat profile):
- Maximum even thickness: 3mm
- Minimum even thickness: 1.6mm
Padding near the watch end to create a raised profile in the center of the strap. Strap thickness is default in other areas outside the padding. Padding tapers towards the strap tip and also tapers towards the side edges.
Lining
- Black hypoallergenic and sweat-resistant French calfskin
- Select any leather shown here
Unlined is only possible for shell cordovan.
Tip Shape
- Point
- Square
- Round
Keepers / Loops
Select any leather color shown here
We do not offer stainless steel keepers for two-piece straps.
Stitching
Stitch styles:
- Corner stitch
- Wide line stitch
- No stitch
- Line stitch
- Full border stitch
- Box stitch
Thread color:
- Any color. Please be specific and distinguish between white vs. cream thread color. We can also find the closest tonal/matching thread color upon request.
Strap Edge Color
Select any color.
Special Ends
- Indented End
- Notched End
- Open End for Fixed Springbars
Watches with fixed (non-detachable) springbars will require open-end straps. Our open-ended straps come with removable screws underneath.